ALLIED MEDICAL Ki Mobility Catalyst 5 Manuale di configurazione - Pagina 2
Sfoglia online o scarica il pdf Manuale di configurazione per Sedia a rotelle ALLIED MEDICAL Ki Mobility Catalyst 5. ALLIED MEDICAL Ki Mobility Catalyst 5 11.
Stampa la pagina
2. Available adjustments and options
Seat Width
•
Seat width is measured from the outside of frame tube on one side to the outside of frame
tube on the other side
•
Check that there is enough room to slide your hand down between the armrest and thigh of
the user. If this is not possible, you need may to try a larger size. Pay particular attention if the
client is thin (ectomorph).
•
Please note: the width is only adjustable on a Catalyst 5 with a width kit. Please note: width
adjustment would not be done at trial set up.
Adjusting the Seat Depth
This is only possible with a depth adjustable frame. 2" forward and 2" rearward adjustment with
minimum Seat Depth of 14" and maximum Seat Depth of 22".
1. Remove the latch catch assembly using a 4mm Allen key and 10mm spanner, refer to the
bottom right bolt in the picture on the right
2. Remove bolt assembly (H) using 4mm Allen key and 10mm spanner
3. Reconnect to the latch assembly and set at desired depth determined by the holes available in
the frame(see diagram and table below).
4. Move the frame insert in or out so the latch assembly is in the correct place
5. Re-attach latch assembly according to the new depth that is required for the user
6. Re-attach the backrest plates onto the frame by installing bolt (H), two saddles (G) and nut (E)
using the 4mm Allen key and 10mm Spanner
7. Repeat steps on opposite side, or do both sides together if backrests are connected
Note: Always test to ensure the spring ends, in the latch mechanism, come out the backrest holes
that they align with
See link for video on depth adjustment: https://vimeo.com/131875623