Avonic AV-CON300 Manuale d'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale d'uso per Controllore Avonic AV-CON300. Avonic AV-CON300 16. Ptz camera controller
Anche per Avonic AV-CON300: Manuale d'uso (13 pagine), Manuale di avvio rapido (2 pagine)
Stampa la paginaIntroduction
Congratulations
Thank you for purchasing the Avonic AV-CON300 PTZ Camera Controller. Before beginning to operate
this device, please read the manual in order to make sure the best performance is obtained. Please,
save this manual for future reference.
Safety Notes
•
Installation and servicing should only be done by Qualified Service Personnel and conform to
all local codes.
•
This unit is designed for indoor use only and it must not be installed where exposed to water
or other liquids and moisture.
•
Before powering on the device, check the input power voltage carefully.
•
Avoid shock and vibration when transporting and installing the device.
•
Electronic devices produce heat. Do not block the ventilation slots of the device and make
sure the installation environment is well ventilated to avoid overheating.
•
Before cleaning, unplug the power cable. Use a soft, damp cloth to clean the device, do not
use strong or abrasive detergent to clean as it will damage the device.
•
If you wish to dispose this product, please contact Avonic to obtain info about the take-back
procedure.
Package contents and Accessories
Quantity
Decription
1 pc
PTZ Camera Controller
1 pc
Power Supply 12V/3A
1 pc
RJ45 break out cable for RS485
1 pc
RJ45 to DIN-8 cable for RS232
Product Overview
The Avonic CM-COM300 is an advanced PTZ camera controller. With this controller it is possible to
control up to 50 cameras and using up to 255 pre-sets.
The controller supports the Visca, Pelco-D and Pelco-P protocol and can be connected with
RS232/485. The Avonic CM-COM300 is therefore compatible with the Avonic cameras as well with
other brands that supports these protocols.
www.avonic.eu
Avonic SKU
AV-CON300
AV-CON300-PSU
AV-CON300-RJ45
AV-CON300-DIN
4