Avonic CM-CON100 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Controllore Avonic CM-CON100. Avonic CM-CON100 16. Ptz camera controller
Anche per Avonic CM-CON100: Manuale d'uso (12 pagine), Manuale d'uso (10 pagine), Manuale d'uso (13 pagine), Manuale d'uso (11 pagine)

Stampa la pagina

OPERATION INSTRUCTIONS

This chapter will explain the operation instructions. If you have connected the RS485 cable to your camera

(see previous chapter) the CON100 will start automatically. When the CON100 is for the first time ON, you will

see that it will display the User PIN

Press

to fill in the pin. The initial pin is "111111".

Pin Error: When "USER PIN: ERROR" shows on screen, it indicates wrong pin was set. Enter correct pin to go to

the next step.

Pin Correct: Screen shows "1" camera icon and default camera number. If there is no operation, after 5

seconds the screen will display the current time. If still no operations, the controller will enter sleepmode

(30sec, 1min, 5min, 10min, 30 min or 60 min.)

After the PIN is correctly entered, you can operate the CON100. The CON100 has three different "Menu's":

•

Non-Setup menu:

•

Setup menu:

•

OSD menu:

See also the picture below. Note that it is very easy to confuse both menu's! So keep always in mind in

which menu you are. See page 12 for the SETUP menu and page 11 for the NON-Setup Menu.

www.avonic.com

to control a camera while filming

to change the settings of the CON100

to control and change the camera settings itself