Aqua One MariSys 240 Manuale - Pagina 12

Sfoglia online o scarica il pdf Manuale per Sistemi di filtrazione dell'acqua Aqua One MariSys 240. Aqua One MariSys 240 15.
Anche per Aqua One MariSys 240: Manuale di configurazione rapida (2 pagine)

Aqua One MariSys 240 Manuale
Trouble Shooting
NO WATER CIRCULATION
1. Check power supply and confirm Power
Head is plugged in.
2. No water in Filter Box, add water to
Maximum Water level indicator.
3. Check Overflow Box to confirm water is
flowing.
4. Check the Pre Filter at the front of the
Overflow Box and clean if needed.
LARGE AMOUNT OF
BUBBLES ARE BEING
PUMPED BACK INTO TANK
1. Check water level in the MariSys, add water
if needed.
2. Check Overflow Box for obstacles.
3. Check Hosing and Tubing for kinks or
obstructions.
4. If using air stones or power heads with
venturi installed, position away from Overflow
Box inlet.
RETURN WATER FLOW IS
SLUGGISH.
1. Check Overflow Hosing or return Hosing for
kinks; straighten Hosing and/or tubing if
needed.
2. Check for obstructions in Overflow Box or
inlet of Power Head.
3. Check the Power Head.
POWER HEAD NOT RUNNING
1. Check the Power Head is plugged in and
has electrical power.
2. Check Impeller in Power Head to confirm it
is rotating freely. Refer the Maintenance
section in this instruction booklet.
WATER LEAKING AT FLEXIBLE
HOSING CONNECTIONS
1. Disconnect Flexible Hoses from connectors
on the MariSys and Overflow Box and clean
connectors thoroughly with an Aqua One
Double Ended Pipe Brush. Reconnect and
tighten hose clamps snugly.
2. If the Flexible Hosing has slipped from
original position, remove and clean area, then
reconnect and tighten hose clamps snugly.
PROTEIN SKIMMER NOT
FUNCTIONING
1. If the Filter is newly set up, it may take a
couple of days for the Skimmer to start
collecting waste.
2. Confirm Air Pump is plugged in.
3. Confirm Air Pump is connected to Wood
Airstone Rigid Airline Tubing.
4. The Wooden airstone may need to be
replaced.
NO FOAM PRODUCTION IN
THE COLLECTION CUP
1. Aquarium is not established yet and has not
produced enough dissolved organics.
2. Wood airstone needs to be replaced.
3. Skimmer is in break-in period, should work in
3 days.
SUDDEN OR GRADUAL LOSS
OF AIRSTONE BUBBLES
1. Possible clogged airline, remove airline
tubing and run under hot water thoroughly.
2. Wood airstone needs to be replaced.
3. Check the Air Control Valve and Check
Valve.
12