AVP Synthesizers QUADWAVE Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Sintetizzatore AVP Synthesizers QUADWAVE. AVP Synthesizers QUADWAVE 4. Avp synthesizers

There is a BYPASS toggle switch and an LFO / MANUAL switch.

The phaser is a fully analogue effect, therefore it has an acceptable level of

analogue noise at the output.

Note: The noise level depends on the position of the controls.

② LFO DELAY section

There is an LFO for modulating the delays, which has three knobs:

WAVE - selects one of five waveforms - saw, reverse saw, sine, rectangle, random;

RATE - adjusts the delay modulation frequency;

DEPTH - adjusts the modulation depth of the delays.

By adjusting the LFO and knobs in the DELAY1 and DELAY2 sections, you can

achieve a CHORUS type of effect.

③ VOLUME control section

There is also a general VOLUME control on the front panel.

The POWER LED next to the volume control indicates that the instrument is on.

④⑤⑥⑦ DELAY1, DELAY2 sections

Both of the delays are stereo delays with identical circuitry. In fact, these are 4

identical delays that can be adjusted separately. Delays contain hybrid

microcircuits, the direct signal path of which is analog, and the delay lines are

digital. The delay time can be adjusted from 30 to 300 ms.

Each of the four delays has the following 3 controls:

TIME - adjusts the signal delay time;

REPEATS - adjusts the number of repetitions of the delayed signal;

MIX - adds a delayed signal to the direct signal.