Aqua PRO APEX Series Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Pompa dell'acqua Aqua PRO APEX Series. Aqua PRO APEX Series 20.

Electrical (continued)

230V WITH CONDUIT

1 - Remove pump box cover (four screws included with pump

2 - Pull wires into pump box, per wiring diagram (see figure 5)

3 - Connect conduit to long hex adapter (part A, already attached)

4 - install white cord strain relief (part E)

5 - Use included screws (part G), to secure white cord strain relief (part E)

6 - Reinstall box cover

115V WITH 16 GAUGE POWER CORD

1 - Remove long hex adapter (part A) off pump

2 - Remove pump box cover (four screws included with pump)

3 - Unscrew and realign the brass bridge (part H), and brass washers (part I), to match 115V wiring diagram (see figure 5)

4 - Run the 16 gauge cord through the rubber cone gasket (part C). Insert cone gasket into black hex cap (part B).

5 - Pull wires into pump box, per wiring diagram

6 - install white cord strain relief (part E)

7 - Use included screws (part G), to secure white cord strain relief (part E)

8 - Tighten black hex cap (part B) to pump box

9 - Reinstall box cover

Figure 9 - DV FLO Pump Electrical Accessories

Please contact 1-877-278-2797 for further assistance.

ECOAQUAPRO.COM