AVR 2000VA Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Controllore AVR 2000VA. AVR 2000VA 6. Automatic voltage regulator

Stampa la pagina

4.5 Terminals-type rear panel

Installation and Application

Shut down the load ( such as host computer, fans etc.), and remove their cables from

the mains outlet;

Place the equipment properly ( refer to Safety Cautions);

Connect the cable of the load with the O/P sockets or terminals block of the AVR;

Connect the I/P cable(or terminals block) of the AVR with The Mains outlet(or electrical

source junction box). (Make sure the N / L / G connected properly);

Provide power to the Load

Input cable

Plunged into the Mains, Select the time-delay output time (3 seconds/ 180 seconds),

and make switch "ON", then AVR start up .The time-delay indicator (Orange LED) will

illuminate, the output will count down (3 seconds/ 180 seconds), and users can turn on

the load after the green indicator illuminate;

Input/Output terminals

Daily start-up: make panel switch "ON", AVR will provide with an normal output;

Daily off: make panel switch "Off", AVR will be turned off;

Maintenance

6.1 Preventive maintenance

which can guarantee the equipment realiablity and performance in a long term. Please

make the following inspections monthly:

Make sure the blowhole not be blocked.

Check whether there is too much dust on the surface.

Check whether the input or output cable is fixed and still insulated.

Make sure the product not be damped.

6.2 Abnormal states handling

If there is a failure, please ask the engineer for help to avoid any further damage or

unnecessary cost.

If the equipment works abnormally, please do self-test as following solutions. If still

can not fix the problem, please ask the distribute or manufacturer for help.

State

LED/LCD meters show nothing

after start-up

No output, Time-delay indicator

illuminate

There is Mains, but the Equipment

don't have output; high/low voltage

indicator illuminate

The Mains is normal; high/low

voltage indicator illuminate

Packing list

Equipment: 1PC

User manual: 1pc

Fuse: 1pc

Others: according to customer's requirement.

Solution

Whether start-up normally?

Whether the input power or fuse works normally?

The equipment is under time-delay state,

please wait 6secs/180secs.

Input voltage is beyond of AVR's standard range

(higher or lower), please check the input voltage

and use the equipment till the input voltage is normal.

The equipment output voltage is overhigh/overlow;

please shut down the equipment first and restart.

It problem still exist, please send it to the professionals

for maintainance

07/08