CPG HP636 Istruzioni per l'installazione e il funzionamento - Pagina 7

Sfoglia online o scarica il pdf Istruzioni per l'installazione e il funzionamento per Gamme CPG HP636. CPG HP636 12. Countertop range

CAUTION: Use only non-abrasive cleaners. Abrasive cleaners could scratch the finish of your

unit, marring its appearance and making it susceptible to dirt accumulation. Do not use

steel wool, other abrasive cleaners or cleaners/sanitizers containing chlorine, iodine,

ammonia or bromine chemicals as these will deteriorate the stainless steel and glass material

and shorten the life of the unit.

Daily

1. Thoroughly clean back, sides, top and front of unit.

2. Clean trivets daily.

Weekly

1. Clean unit thoroughly. Clean stainless steel or chromed surfaces with a damp cloth and polish

with a soft, dry cloth. A detergent may be used for cleaning. To remove discolorations, use a

non-abrasive cleaner.

2. To clean the drip pan. Remove the drip pan by grabbing the handle and pulling it out of the

opening in the front panel. To replace the pan, reverse this procedure.

3. Burner air shutter openings must be kept clean. Main burner ports must be kept clean. To clean

burners, boil them in a strong solution of lye water for 15 to 20 minutes. Then either brush with

a wire brush or clean gas ports with a sharp-pointed metal instrument to insure open ports.

CAUTION: Clean the regulator at least once a month. Make sure the vent opening is open

and not blocked in any way. Failure to do so will cause variations in pressure. Your unit

will not function as well and it could shorten the life of the product.

NOTE: THIS APPLIANCE MUST ONLY BE SERVICED BY AN AUTHORIZED AGENT.

NOTE: Parts protected by the manufacturer or his agent are not to be adjusted by the installer

unless the installer is an authorized service agent.

If you have any questions or problems contact your nearest Service Representative.

CLEANING & MAINTENANCE

SERVICE /REPAIR