Billion BiPAC 7800(N)X(L) Manuale di configurazione - Pagina 3
Sfoglia online o scarica il pdf Manuale di configurazione per Modem Billion BiPAC 7800(N)X(L). Billion BiPAC 7800(N)X(L) 11. 3g/4g lte (wireless-n) (vpn) adsl2+/ fibre broadband router
Anche per Billion BiPAC 7800(N)X(L): Manuale di configurazione (10 pagine), Manuale di avvio rapido (10 pagine)
Stampa la pagina
1. Getting started
Requirements
1.
Any operating system is compatible, however depending on the version this
may affect your internet experience
2. Internet Explorer 6.0 or higher / Firefox 2.0 or higher
3. Ethernet network adapter
4. Wireless enabled computer (if you are using the wireless feature)
Connecting the Billion BiPAC 7800NXL to your computer
1.
Connect the network cable to one of the yellow ports located at the back of
the modem; the other end will connect to your computer
2. Connect a telephone cable to the grey port labeled DSL at the back of the
modem, and connect the other end to your telephone wall socket
3. Finally, connect the power cable to your modem and the power adapter to
your power point. Press the power button to the "ON" state
The diagram below shows how the modem connects physically to your phone
line, computer and power point.
4. Now that the modem is connected to your computer, phone line, and is
powered on, you need to ensure that the lights on the modem indicate the
following:
Power
DSL
Ethernet (1-4)
A network icon will appear in your task bar, and you are now ready to setup
your Internet connection
ON
ON
On or Blinking