Allied Telesis SwitchBlade AT-SB4108-80 Manuale di installazione rapida - Pagina 7
Sfoglia online o scarica il pdf Manuale di installazione rapida per Interruttore Allied Telesis SwitchBlade AT-SB4108-80. Allied Telesis SwitchBlade AT-SB4108-80 11. Switchblade chassis and fan tray
Stampa la pagina
Quick Install Guide
C613-04029-01 REV C
7.
Secure the blank faceplates
Press each faceplate home (until its front panel engages, or nearly engages,
the threaded holes inside the chassis).
Use the captive Phillips screws to secure each faceplate to the chassis (two
screws per faceplate).
Secure blank faceplates to all switch controller and line card bays that will not have
controllers or cards installed. The faceplates prevent dust and debris from entering the
switch and maintain proper airflow.
The switch may overheat or be damaged by dust and debris if bays are left
uncovered.
Fan Tray Package Contents
If you purchased a SwitchBlade chassis, the fan tray will be pre-installed in the
chassis.
If you purchased a SwitchBlade fan tray without also purchasing a
SwitchBlade chassis, the following items are included with each fan tray.
■
One fan tray.
■
One SwitchBlade Chassis and Fan Tray Quick Install Guide.
■
One warranty card.
Related items that can be purchased separately:
■
Blank faceplates for fan tray bays (AT-SB4191 for the SwitchBlade 8 or
AT-SB4194 for the SwitchBlade 4).
Contact your sales representative if any items are damaged or missing.
Installing A Fan Tray
Fan trays can be hot swapped. The switch will continue to operate for brief periods while
fan trays are exchanged.
Do not operate the switch for extended periods without an operational fan tray.
Doing so will cause the switch to overheat and shut down, and may also
damage the switch, switch controllers and line cards.
7