Allied Telesis SwitchBlade x908 Series Manuale di configurazione del software - Pagina 4
Sfoglia online o scarica il pdf Manuale di configurazione del software per Interruttore Allied Telesis SwitchBlade x908 Series. Allied Telesis SwitchBlade x908 Series 16. Advanced layer 3 modular switch
Anche per Allied Telesis SwitchBlade x908 Series: Scheda tecnica (10 pagine)
Stampa la pagina
Example 1-3: Setting the maximum bandwidth limit for each user
In example 1-1, we configured an egress rate on ports. But the granularity of that bandwidth limiting
was multiples of 651kbps. It is possible to achieve finer-grained limiting using the devices advanced
QoS capability. In this example we assume that there is one device with a known IP address,
attached to each port. Policers will be configured to provide bandwidth limiting.
Users connected to the switch downloading files from the Internet
mls qos enable
access-list 3011 permit ip any 192.168.1.1/32
access-list 3012 permit ip any 192.168.1.2/32
access-list 3013 permit ip any 192.168.1.3/32
.
.
.
class-map cmap1
match access-group 3011
class-map cmap2
match access-group 3012
class-map cmap3
match access-group 3013
.
.
.
policy-map pmap1
class cmap1
police single-rate 256 3000 5000 exceed-action drop
class cmap2
police single-rate 256 3000 5000 exceed-action drop
class cmap3
police single-rate 256 3000 5000 exceed-action drop
.
.
.
interface port1.0.24
service-policy input pmap1
This set of commands will set the total egress limit (download traffic) for each user to 256kbps. The
granularity is around 1kbps.
Page 4 | AlliedWare Plus™ OS How To Note: QoS
(192.168.1.1-192.168.1.25)
Port 24
Internet
connection
1. Setting the egress rate