Avsl Adastra 953.164UK Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Avsl Adastra 953.164UK. Avsl Adastra 953.164UK 6. Bluetooth ceiling speaker set

Operation

When both active and passive speakers are installed into the ceiling or wall, power up the

speakers from the mains and if the Bluetooth is switched on, an audible notification will be

played through the speakers.

If the audio source is a line input into the active speaker, ensure that the volume is fully

turned down on the audio source (CD player, mp3 player, mixer or another BCS-series

active speaker) and start playback while gradually increasing the volume to hear the sound

output from the speakers.

Ensure that any further connected sets of BCS-series ceiling speakers are also reproducing

the sound output. If not, check the line level audio connections are the correct way around.

Increase the volume at the audio source to the required level.

Bluetooth

If the Bluetooth function is switched on, a smart phone or tablet computer may be paired

with the active speaker of the BCS-series set to playback audio tracks wirelessly.

Pair the smartphone or tablet by scanning for available Bluetooth devices and selecting to

pair with "Adastra BCS**S" (where "**" is the speaker size 52 or 65). If there is more than

one Bluetooth ID called "BCS**S", it may mean that the Bluetooth function needs to be

deactivated on some active speakers that are acting as "slave" sets (i.e. receiving audio

from another BCS-series set).

Once pairing is complete and confirmed that it is connected for media audio, turn the

volume fully down on the smartphone or tablet and play an audio track.

Gradually increase the volume until the sound output can be heard through the speakers

and continue until the required volume level is reached.

Only one device may be paired with a BCS-series set at any one time, so it is necessary to

unpair a device before connecting a new device.

If any connections need to be changed, the active and passive speakers can be removed

from the ceiling or wall by removing the grille and unscrewing the 4 clamp screws in turn,

until the clamps are released and turned inward. Take care when extracting the speaker

from the hole to avoid damage to the speaker and supporting surface. Make any necessary

adjustments and re-install the speaker(s) again when completed.

When not in use, stop any audio playback and power down the BCS-series ceiling speakers

from the mains power supply.

953.164UK, 953.165UK User Manual