Avsl Citronic DSM26 Manuale d'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Avsl Citronic DSM26. Avsl Citronic DSM26 12. Digital speaker management system
Anche per Avsl Citronic DSM26: Manuale d'uso (12 pagine)
LAN setup
On the PC that is to be connected with the DSM26 (or multiple units), navigate to the network
adaptor properties.
e.g. in Windows 10, click the start button and click the settings icon (cog symbol)
Select Network & Internet and Ethernet.
Select Change Adapter Options, right click the relevant connection and select Properties.
The window opposite should appear, showing network adaptor options.
Right click on TCP/IP and the window opposite will appear.
Ensure that the button for Obtain an IP address automatically
This will ensure that the PC will connect to the DSM26 unit as a LAN host.
The next step is to connect the PC to the DSM26 unit directly via LAN cable.
In the DSM26 software main screen, click the Connection button.
The window opposite will open, showing the COM port and IP settings.
Click OK below the auto-detected IP address and the DSM26 will connect.
Once connected directly to the PC via LAN cable, it is possible to access the DSM26 network
adaptor from the PC by opening a browser window (IE, MS Edge or Chrome etc.)
Type in the (auto-detected) IP address of the DSM26 into the address bar of the browser.
(e.g. as shown in the connection window opposite, this would be "http://10.10.100.254")
A security window will open as follows...
Both User name and Password are "admin" by default.
Once logged into the DSM26, an edit window will open, as shown below.
Click on the "AP Interface Setting" link and a new window will open to edit network settings.
The unit can now be connected to the main LAN network and connected by its IP address in the DSP Ver3.9 application.
11
All manuals and user guides at all-guides.com
If the display is not in English, click the English button.
There are many advanced settings within this menu,
which should only be edited by the network
administrator but the basic LAN settings are easily
set as follows.
In the AP Interface Setting window, it is possible to edit the IP
address of the DSM26 for LAN connection. Enter a new valid IP
address into the top field of the "LAN Setup" section (Wireless
does not apply to the DSM26 unless modified)
Click "Apply" and a message will appear advising...
"Set Successfully, Restart to use new setting"
Click on the "Device Management" link.
(the login user name and password can be edited here)
Click on the "Restart" button and the DSM26 will restart.
Note: to log back in, it will be necessary to input the new IP
address into the browser address bar (and new user name and
password if they have been edited)
170.665UK User Manual