Avsl Qtx QX12PA Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Attrezzature per DJ Avsl Qtx QX12PA. Avsl Qtx QX12PA 9.

Rear Panel Layout

Connection

Your new qtx QXPA unit may arrive with you with the internal battery charged. Before

connecting to the mains, switch the unit on and check the POWER LED. If it is green, there is

charge in the battery. If it is red, then you will need to charge the battery before using away

from a mains supply (see "Charging the battery" below)

Connect the QXPA unit to the mains using the appropriate mains IEC lead supplied. You may

otherwise opt to connect the spring terminals at the rear to an external 12Vdc supply, such as

a car battery, or use the internal battery if charged.

When not in use but connected to the mains, if the POWER switch (19) is in the

the internal battery will be re-charged from the mains supply. This can be observed by the

CHARGE LED which will light orange when charging. When fully charged, the CHARGE LED will

change to green.

Note: it is recommended to store the PA unit at an ambient temperature and not with the

battery fully discharged.

USB input

Media player controls

Echo effect level

Wired microphone(s)/guitar volume

Treble EQ boost/cut

VHF microphone A volume

VHF carrier and audio signal indicators

Wired microphone input jack 2

Wired microphone/guitar input jack 1

10. 3.5mm auxiliary line input

11. Media player LCD display

12. SD/MMC card slot

13. Bass EQ boost/cut

14. Main volume level

15. Talk over control on/off

16. VHF microphones mid contour EQ

17. VHF microphone B volume

18. Mains and battery charge indicators

19. Power on/off button

20. DC power inlet jack (5.5 x 2.1mm)

21. Mix line output 2 x RCA

22. Line input 2 x RCA

23. IEC mains inlet & fuse holder

178.853UK, 178.856UK User Manual

off

position,