Abatron BDI3000 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Hardware del computer Abatron BDI3000. Abatron BDI3000 18. Bdipro
Anche per Abatron BDI3000: Manuale d'uso (18 pagine)

Stampa la pagina

Access

bdi

JTAG interface library, BDI3000 (XScale)

2.2 Connecting the BDI3000 to Power Supply

The BDI3000 needs to be supplied with the enclosed power supply from Abatron (5VDC).

Before use, check if the mains voltage is in accordance with the input voltage printed on power

supply. Make sure that, while operating, the power supply is not covered up and not situated near

a heater or in direct sun light. Dry location use only.

For error-free operation, the power supply to the BDI3000 must be between 4.75V and 5.25V DC.

The maximal tolerable supply voltage is 5.25 VDC. Any higher voltage or a wrong polarity

might destroy the electronics.

The green LED «BDI» marked light up when 5V power is connected to the BDI3000

Please switch on the system in the following sequence:

• 1 –> external power supply

• 2 –> target system

+5 VDC

GND

RS232

POWER

casing connected to ground terminal

TARGET A

Installation Manual

TARGET B

V 1.00