Avtech 359ah Manuale rapido
Sfoglia online o scarica il pdf Manuale rapido per Telecamera di sicurezza Avtech 359ah. Avtech 359ah 2. Avtech ip cameras quick guide
Stampa la pagina
QUICK GUIDE
Please read instructions thoroughly before operation and retain
it for future reference. Online manual download:
www.surveillance-download.com/user/m359a.swf
INSTALLATION (Type 2)
Step1: Put the installation sticker on where you want to
install the camera. Then, drill the two screws at
top to the wall as shown in the picture.
Note: leave some space between the screws
and wall.
Step2: Hang the camera at the screws you just fixed,
and make sure the camera stays in place.
Decide the cable direction (up / down) before you
fasten the screws tight to the wall.
Step3: Drill the rest of the screws and make sure all
screws securely fastened.
Step4: Adjust the angle of your camera with the supplied
wrenches for a better viewing.
PACKAGE CONTENT
Before starting to set up your camera, please make sure
items below in your box:
or
Quick
Camera
guide
For selected models only:
Wall
Screws
Wrenches
Plugs
*
CABLE OVERVIEW
Below is an overview of various cables that can be used
with the camera. Besides, it is followed by a table, which
offers simple descriptions of cable connection.
INSTALLATION (Type 1)
Step1: Fix the bracket to where you want to install the
camera with the supplied three screws.
Step2: Remove the Joint Lock from the bracket. Then,
connect the Joint Lock to the backside of the
camera.
Desiccant
Step3: Connect the camera with the Joint Lock connected
to the bracket. After that, secure the Joint Lock to
fix.
Bracket
Step4: Connect the camera to power.
Color
--
--
Black & Brown
Yellow
Pink
Red
* For PoE (IEEE802.3af) installation, make sure your network
cable has the maximum cable resistance of 20Ω, such as CAT.5e
or CAT.6 cables, to conform to the standard of IEEE802.3af.
m359a_459a_359ah_459ah_357r_457r_565__565ir_565a_561_552a_557a_837_quick_V1.1
Cable
Description
Power cable
DC12V power supply.
RJ45 network
Connect it to a RJ45 cable.
cable*
GND
Ground wire
Reserved for external alarm
Alarm-in
device connection
Reserved for external alarm
Alarm-out
device connection
Remove the insulating coating
RESET
of wire, and twist it with a
ground wire together to reset
default camera
536z