DGS Real Life Ninja Starter Pack 1 Manuale di istruzioni per il montaggio - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Accessories DGS Real Life Ninja Starter Pack 1. DGS Real Life Ninja Starter Pack 1 8.

Stampa la pagina

Lay out Monkey Bar Side Rails.

Insert Rungs into pre-drilled holes and fasten with

allen head bolts on each side.

View from above

Side Rails x 2 • Rungs x 13 • 3/16 Allen Head Bolts x 26

Attach wooden lift support to salmon

ladder side and secure with velcro strap

Side View

Velcro

Rung

Strap

Make sure you are attaching

Lift Support to Salmon Ladder

Side of Monkey Bars

Attach legs of salmon ladder to header using

four pre-installed carriage bolts with at washer,

lock washer and nut on each.

View from Front

Salmon Ladder Header

Carriage Bolts

x 2

Side View

Flat Washer

Lock Washer

Nut

(on each bolt)

DGS - 17 Lucienne Ave. Danielson, CT 06239 - 800-932-3339 - [email protected]

Please visit gymsupply.com for product assembly videos.

View from Top

Carriage Bolts

x 2

Header

Fasten Rock Wall panels to back of warped

wall using 2" Deck Screws into pre-drilled holes.

Be sure the panel with pre-installed mounting

block is installed with the block closest to the

top, and that top edge of panel is ush.

2" Deck Screws

Lift Warped Wall end of Monkey Bars so that

mounting brackets t into pre-installed wooden

mounting block. Adjust horizontally to line up

bolt holes on brackets and warped wall.

Mounting

Block

wooden lift support

Lift other end of Monkey Bars using wooden lift

support, taking care that both sides are lifted

evenly. Secure Monkey Bars to warped wall

using four 1/2" x 3 1/2" bolts with lock washer

and at washer.

ATTENTION:

Wooden Lift support should

never be left unattended and

MUST BE STABILIZED by at least

one person at all times.

Lock Washer

Flat Washer

3 1/2" Bolts

x 4

on Each Bolt