Avtech AVT1206A Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Telecamera di sicurezza Avtech AVT1206A. Avtech AVT1206A 8. Ir dome camera

CONNECTION

1. DC12V Input Terminal

Connect the power terminal of the camera to a DC 12V regulated power supply.

Note: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power tolerance of

this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.

2. Video Output Connector (VIDEO OUT)

Connect the camera video output to the video input of a DVR with 75Ω coaxial cable.

Note: To ensure the camera has sufficient protection against moisture, an extra waterproof measure, such as

by using an insulating tape, must be used to cover the power and video connectors after connection.

IR LED BRIGHTNESS CONTROL (PWM)

This function is used to control the brightness of IR LEDs. The brightness is set to the maximum by default.

Note: This function shows only on our brand's HD CCTV DVR with specific firmware version. If you

don't see this option, try upgrading your DVR or check with your installer.

For example, if you feel the image is too bright when the night mode is on, resulting a little bit overexposure,

you can use this function to modify as you wish.

On the DVR live view, right click to show the DVR main menu, and select ADVANCED CONFIG 

DCCS  DCCS MENU.

CAMERA

DETECTION

ALERT

NETWORK

DISPLAY

RECORD

DCCS

NOTIFY

EXIT

In DCCS SETUP, click the value to change it from 0 ~ 100.

DCCS SETUP

IR1 BRIGHTNESS USER

ADVANCED CONFIG

CH1

CH2

CH3

OSD MENU

DCCS MENU

F.W.

DEVICE

CONNECTION

100

CH4

SETUP

AVT SERIES