DGSHAPE VL-300 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature mediche DGSHAPE VL-300. DGSHAPE VL-300 16.

Material Conditions

In order for a material to be used for imprinting, the material must meet all of the following conditions.

Material

• Acrylic

• Polypropylene

• Polystyrene

• ABS

• Leather

• Polyurethane

• Vinyl chloride

Thickness

Maximum: 26 mm (1.02 in.)

* Height from the base table to the upper surface of the material loaded on the VISE KIT: 50 mm (1.96 in.) or less

Size

The material is large enough to be firmly secured.

You can use the center vise or the adhesive sheet to secure the material. It is acceptable for the material to be

of a size such that it protrudes from the center vise or adhesive sheet, but the essential requirement is that

the material can be firmly secured.

Shape

There must be no unevenness on the imprint surface.

Imprinting is not possible for material that comes into contact with the moving part of the machine when

being loaded or during imprinting.

Flat view:

Cross-sectional view:

The edge of the material is too high.

Gentle undulations of less than 0.5 mm (0.0196 in.).

Correct imprinting is not possible if the height displacement cannot be tracked by the head.

NOT OK

L-shape

Getting Started

NOT OK