Dell D11S Manuale di configurazione e specifiche - Pagina 26

Sfoglia online o scarica il pdf Manuale di configurazione e specifiche per Computer portatile Dell D11S. Dell D11S 35. Small form factor
Anche per Dell D11S: Manuale di avvio rapido (2 pagine), Configurazione e specifiche (35 pagine), Manuale d'uso (45 pagine), Manuale di installazione (22 pagine), Configurazione e specifiche (37 pagine), Manuale di configurazione e specifiche (31 pagine)

Stampa la pagina
Dell D11S Manuale di configurazione e specifiche
Option
Extend BIOS POST Time
Full Screen Logo
Warnings and Errors

Manageability

Table 25. Manageability
Option
USB provision
MEBx Hotkey

Virtualization support

Table 26. Virtualization Support
Option
Virtualization
VT for Direct I/O
Trusted Execution
26
System setup
Description
This option is set to Thorough by default.
This option creates an additional pre-boot delay.
•
0 seconds (default)
•
5 seconds
•
10 seconds
This option will display full screen logo if your image match screen resolution. The option Enable Full
Screen Logo is not set by default.
This option causes the boot process to only pause when warning or errors are detected. Choose any
one of the option:
•
Prompt on Warnings and Errors—Default
•
Continue on Warnings
•
Continue on Warnings and Errors
Description
This option is not selected by default.
This option is selected by default.
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by the Intel Virtualization technology.
•
Enable Intel Virtualization Technology
This option is set by default.
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by the Intel Virtualization technology for direct I/O.
•
Enable VT for Direct I/O
This option is set by default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology.
•
Trusted Execution
This option is not set by default.