Dell Inspirion M5040 Manuale d'uso - Pagina 20

Sfoglia online o scarica il pdf Manuale d'uso per Computer portatile Dell Inspirion M5040. Dell Inspirion M5040 41. Dell inspiron laptop quick start
Anche per Dell Inspirion M5040: Avvio rapido (2 pagine)

Dell Inspirion M5040 Manuale d'uso
Back to Contents Page
  Keyboard
Dell Inspiron M5040/15-N5040/15-N5050 Owner's Manual
  Removing the Keyboard
  Replacing the Keyboard
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
 
CAUTION:
To help prevent damage to the system board, remove the main battery, see
 Removing the Keyboard
 
1. Follow the instructions in
Before You
 
2. Remove the battery. See
Removing the
 
CAUTION:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
 
3. Turn the computer over and open the display as far as possible.
 
4. Using a plastic scribe, release the four tabs that secure the keyboard to the palm rest and ease the keyboard up until it clears off the palm rest.
1
plastic scribe
3
keyboard
 
CAUTION:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
 
5. Carefully turn the keyboard over and place it on the palm rest assembly.
 
6. Lift the connector latch that secures the keyboard cable to the connector on the system board and remove the keyboard cable.
 
7. Lift the keyboard off the computer.
Begin.
Battery.
2
tabs (4)
Removing the
Battery, before working inside the computer.