Dell Inspiron 1090 Manuale di servizio - Pagina 35

Sfoglia online o scarica il pdf Manuale di servizio per Computer portatile Dell Inspiron 1090. Dell Inspiron 1090 47.
Anche per Dell Inspiron 1090: Manuale di servizio (47 pagine)

Dell Inspiron 1090 Manuale di servizio
Back to Contents Page
  Wireless Mini-Card(s)
Dell™ Inspiron™ 1090 Service Manual 
  Removing the Mini-Card(s)
  Replacing the Mini-Card(s)
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
is not covered by your warranty.
 
CAUTION:
surface (such as a connector on your computer).
 
CAUTION:
computer.
NOTE:
Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.
If you ordered a wireless Mini-Card with your computer, the card is already installed.
Your computer has one full Mini-Card slot and one half Mini-Card slot:
 One full Mini-Card slot — supports Wireless Wide Area Network (WWAN).
l
 One half Mini-Card slot — supports Wireless Local Area Network (WLAN) or Worldwide Interoperability for Microwave Access (WiMax).
l
NOTE:
Depending on the configuration of the computer when it was sold, the Mini-Card slot may or may not have a Mini-Card installed.
 Removing the Mini-Card(s)
 
1. Follow the instructions in
 
2. Remove the label door (see
 
3. Remove the keyboard (see
 
4. Remove the palm-rest assembly (see
 
5. Remove the battery (see
 
6. Disconnect the antenna cables from the Mini-Card(s).
 
7. Remove the screw that secures the Mini-Card(s) to the system board.
1 antenna cables (2) 2 Mini-Card
3 screw
 
8. Lift the Mini-Card(s) out of the system-board connector.
More user manuals on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the Label
Door).
Removing the
Keyboard).
Removing the Palm-Rest
Removing the
Battery).
4 system-board connector
ManualsBase.com
Removing the
Assembly).
Battery) before working inside the