Dell Inspiron 1150 Manuale di servizio - Pagina 28

Sfoglia online o scarica il pdf Manuale di servizio per Computer portatile Dell Inspiron 1150. Dell Inspiron 1150 39. Dell inspiron 1150: quick start
Anche per Dell Inspiron 1150: Manuale di configurazione (2 pagine)

Stampa la pagina
Dell Inspiron 1150 Manuale di servizio
20.  Lift the front of the system board out and away from the base plastics.
 

Installing the System Board

1.  Insert the video connector on the replacement system board through the back of the base plastics.
2.  Replace the two hex nuts that secure the video connector to the base plastics.
3.  Replace the two M2.5 x 6-mm screws that secure the left antenna, which is located between the hard drive and optical drive cages, to the system
board.
4.  Replace the two M2.5 x 5-mm screws that secure the optical drive cage to the system board.
5.  Replace the two M2.5 x 5-mm screws that secure the hard drive cage to the system board.
6.  Replace the two M2.5 x 5-mm screws that secure the chipset heat sink to the system board.
7.  Replace the battery bay shield, and reinstall the two M2.5 x 5-mm screws that secure the shield to the system board.
8.  Replace the speakers.
9.  Replace the microprocessor.
 
NOTICE:
Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the microprocessor thermal-cooling assembly.
10.  Replace the
11.  Replace the
12.  Replace the
13.  Replace the
14.  Replace the keyboard.
15.  Replace the
16.  Replace the
17.  Replace the
18.  Insert the battery into the battery bay.
19.  Connect the AC adapter to the computer and to an electrical outlet.
 
NOTICE:
damage to the computer.
 
NOTE:
After replacing the system board, enter the computer Service Tag sequence into the BIOS of the replacement system board.
20.  Turn on the computer.
21.  Insert the CD that accompanied the replacement system board into the appropriate drive, and turn on the computer. Follow the instructions on the
screen.
Back to Contents Page
 
Great user manuals database on
Before you replace the microprocessor thermal-cooling assembly, wipe the thermal grease off of the assembly with a clean paper towel.
microprocessor thermal-cooling
assembly.
palm
rest.
display
assembly.
EMI
shield.
Mini PCI
card, modem, and
memory module(s)
CD or DVD
drive.
hard
drive.
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
UserManuals.info
that you removed from the old system board.