Allied Telesis AT-MC102 Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale Allied Telesis AT-MC102. Allied Telesis AT-MC102 18.

Electrical Safety and Installation

Requirements

STANDARDS: This product meets the following standards

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and , if not installed and used in accordance with this instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Note: Modiﬁcations or changes not expressly approved of by the manufacturer or the

FCC, can void your right to operate this equipment.

This Class A digital apparatus meets all requirements of the Canadian Interference-

Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le

matériel brouilleur du Canada.

RFI Emission

WARNING: In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

Immunity

Laser

At time of installation the Fiber Optic Lasers comply with FDA Radiation Performance

Standard 21CFR Subchapter J, applicable at date of manufacture.

SAFETY

Power to the hub must be sourced only from the adapter.

EUROPE—EC

Use TÜV licensed AC adapter of 12V dc, min 500mA.

Use a Safety Agency Approved AC adapter of 12V dc, min 500mA.

This is a "CLASS 1 LED PRODUCT"

U.S. Federal Communications Commission

Canadian Department of Communications

EN55022 Class A

EN50082-1

EN60825