Dell Inspiron Mini 10z Manuale di servizio - Pagina 16

Sfoglia online o scarica il pdf Manuale di servizio per Computer portatile Dell Inspiron Mini 10z. Dell Inspiron Mini 10z 45. Service manual
Anche per Dell Inspiron Mini 10z: Manuale di avvio rapido (26 pagine)

Dell Inspiron Mini 10z Manuale di servizio
Back to Contents Page
  Display
Dell™ Inspiron™ 1010 Service Manual 
  Removing the Display Assembly
  Replacing the Display Assembly
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
 
CAUTION:
To avoid damage to the display, you must not disassemble your Edge-to-Edge display assembly in the field.
 Removing the Display Assembly
 
1. Follow the instructions in
Before You
 
2. Remove the battery (see
Removing the
 
3. Remove the keyboard (see
 
4. Remove the palm rest (see
 
5. Remove the hard drive (see
 
6. Remove the palm rest bracket (see
 
7. Disconnect the display cable from the system board connector.
 
8. Disconnect the Mini-Card cables from its connectors.
 
9. Make note of the Mini-Card cable routing and pull the Mini-Card cables out through the system board so that they are clear of the computer base.
 
10. Remove the 3-in-1 Media Card Reader (see
1
display cable connector
3
TV tuner connector cables
 
11. Disconnect the TV tuner cables from its connectors.
 
12. Remove the two screws that secure the display assembly to the computer base.
Begin.
Battery).
Removing the
Keyboard).
Removing the Palm
Rest).
Removing the Hard
Drive).
Removing the Palm Rest
Bracket).
Removing the Media Card
2
Mini-Card connector cables
Removing the
Reader).
Battery) before working inside the