Avtech RMA-DTH-SEN Nota di installazione - Pagina 3

Sfoglia online o scarica il pdf Nota di installazione per Accessories Avtech RMA-DTH-SEN. Avtech RMA-DTH-SEN 4. Digital temperature & humidity sensor

Configure Your Digital Temperature & Humidity Sensor

Use Room Alert's Built-In Web Interface

Navigate to

you see below will vary depending on the model.

1. Scroll to your external digital sensor(s), the total number of which will vary depending

on the Room Alert model.

2. Find the digital sensor interface that matches the port you connected your Digital

Temperature & Humidity Sensor to. For example, if you used the first digital port on

your Room Alert, look for Sensor 1 Alarm Configuration; if you used the second, look

for Sensor 2 Alarm Configuration, and so on. Notice that your Room Alert monitor

automatically detects the type of digital sensor and displays it in Sensor Type.

3. In Sensor X Label, you may leave the default, "Ext Sensor X," or enter something more

descriptive of up to 15 characters. You may use the following characters in sensor

labels: letters, numbers, spaces, hyphens (-), underscores (_) and periods (.).

4. Alarm On automatically populates with the default temperature scale and Humidity.

Please refer to your Room Alert User's Guide & Reference Manual to change the default

temperature scale.

5. In High and Low, you may leave the default, 0—which means no alarm is configured—

or enter values for high and low thresholds. Your Room Alert generates alerts based on

those thresholds.

6. In Adjust, you may leave the default, 0, or enter a value to adjust the temperature or

humidity reading if it differs from a known value at that location.

AVTECH Software, Inc.

Settings

Sensors



in the web interface of your Room Alert. The options

Page 3

AVTECH.com