Craden DP8 Manuale dello sportello di assistenza - Pagina 15

Sfoglia online o scarica il pdf Manuale dello sportello di assistenza per Stampante Craden DP8. Craden DP8 19. Transaction printers
Anche per Craden DP8: Manuale tecnico (8 pagine), Manuale di installazione (2 pagine), Manuale supplementare (18 pagine)

Stampa la pagina

DP8 & DP9 KEYPAD - DISPLAY

Keypad Operation

EJECT:

ejects an inserted document. Should a document remain partially in the printer, press

eject again to fully eject paper. If "CLEAR EJECT JAM" is displayed, press the CLEAR

key and EJECT again.

A:

moves a document in with each depression. If held depressed, the document will

slowly move into the printer. This key will also scroll forward through settings for a

configuration parameter (pg. 4).

B:

moves a document out with each depression. If held depressed, the document will

slowly move out of the printer. This key will also scroll backward through settings for a

configuration parameter (pg. 4).

FUNCT:

If no digits have been entered, FUNCT will override automatic alignment for one

document.

CLEAR:

erases any previously keyed digits before they are transmitted to the host by the

FUNCT or ENTER keys.

ENTER:

transmits previously keyed digits to the host system. All responses are host defined.

This key also initiates document printing if the printer is configured to delay printing

until the ENTER key is pressed (See Printer Parameters on pg. 4).

0 to 9:

enter digits to be transmitted to the host by the FUNCT or ENTER keys. Key

depressions appear on the lower display line.

To Lock/Unlock Keypad

On the keypad, press 9 9 FUNCT to enter the Override Parameters menu. Press the A key to

lock and unlock the keypad. Press the ENTER key twice to return to READY status.

Light Operation

DP9 printers have lamps to identify dual port activity that are utilized when the Communication

Parameter INTERFACE DUAL PORT is set to Yes (see pg. 4). The lamp labeled "A" indicates the

port closest to the printer's left side is active and the lamp labeled "B" indicates the port closest to

the printer's right side is active. When no green lights are lit and READY is displayed, the printer

is waiting for a communication from the teller system.

If one of the green lights is on and there is no paper in the printer, there is more print pending.

Insert paper (even if the teller screen is not prompting you) and the printer will finish printing.

Display Operation

There is a contrast knob inside the cabinet to the left of the ribbon instruction/configuration label

that may be adjusted for maximum legibility depending on the viewing angle (see figure 2).

Figure 1

Display contrast adjust

Figure 2