ensol ES1V2.65 Istruzioni per l'installazione - Pagina 14

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Inverter ensol ES1V2.65. ensol ES1V2.65 20. Flat solar collectors

escape it is necessary to close the ball valve.

4.3.3 Insulation work

Insulation work should be done after performing all inspection operations.

Directions!

−

High temperature and weather resistant insulation must be used to insulate

the conduits which are outside the building.

If necessary, protect the insulation against damage caused by birds.

−

High temperature resistant insulation must be used to insulate the conduits

inside the building.

4.4

Enclosure of the solar system

THE MONTER / INSTALLER MUST BE SURE OF A CORRECT

INSTALLATION AND LEAKPROOF OF THE COLLECTORS BEFORE

ENCLOSING THE SOLAR SYSTEM!

4.4.1 montage of the side flashing

4.4.2 Support frame for centre flashing

Installation instruction

of the flat solar collectors models ES1V2.0, ES1V2.65,

ES2V/2.0 AL, ES2V/2.65

integrated in the slate roof.

Affix both hook-in elements at the outer side of each

collector. Use four self-tapping screws (4,2 x 13mm)

for each element at the provided holes.

Clip in the support frame for the centre flashing

between the collectors (in the vertical centre).