Dell Precision M6500 Manuale di servizio - Pagina 8

Sfoglia online o scarica il pdf Manuale di servizio per Computer portatile Dell Precision M6500. Dell Precision M6500 49. Latitude ultrabook series; e-family series; mobile precision series
Anche per Dell Precision M6500: Informazioni sulla configurazione e sulle caratteristiche (8 pagine), Manuale operativo (32 pagine), Manuale operativo (46 pagine), Manuale (10 pagine), Manuale (46 pagine), Manuale operativo (46 pagine)

Stampa la pagina
Dell Precision M6500 Manuale di servizio
FLASH-ON-FLASH
OFF-FLASH-OFF
ON-FLASH-ON
OFF-FLASH-FLASH
FLASH-FLASH-FLASH
FLASH-FLASH-OFF
OFF-ON-OFF
FLASH-FLASH-ON
 Dell Diagnostics

When to Use the Dell Diagnostics

It is recommended that you print these procedures before you begin.
NOTE: The Dell Diagnostics software works only on Dell™ computers.
NOTE:
The Drivers and Utilities media is optional and may not ship with your computer.
Enter System Setup (see
Entering System
System Setup and is active.
Start the Dell Diagnostics from either your hard drive or from the Drivers and Utilities media.

Starting the Dell Diagnostics From Your Hard Drive

1. Turn on (or restart) your computer.
2. When the DELL logo appears, press <F12> immediately.
NOTE:
If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from your Drivers and Utilities media.
System board error
LCD panel error
Memory compatibility error
Memory is detected but has
errors
Modem error
System board error
Option ROM error
Storage device error
Video card error
Setup), review your computer's configuration information, and ensure that the device you want to test displays in
1. Reseat the processor.
2. Replace the system board.
3. Replace the processor.
1. Reseat the LCD cable.
2. Replace the LCD panel.
3. Replace the video card/system board.
1. Install compatible memory modules.
2. If two modules are installed remove one and test. Try the
other module in the same slot and test. Test the other slot
with both modules.
3. Replace the memory.
4. Replace the system board.
1. Reseat the memory.
2. If two modules are installed remove one and test. Try the
other module in the same slot and test. Test the other slot
with both modules.
3. Replace the memory.
4. Replace the system board.
1. Reseat the modem.
2. Replace the modem.
3. Replace the system board.
1. Replace the system board.
1. Reseat the device.
2. Replace the device.
3. Replace the system board.
1. Reseat the hard drive and optical drive.
2. Test the computer with just the hard drive and just the optical
drive.
3. Replace the device that is causing the failure.
4. Replace the system board.
1. Replace the system board.