Allied Telesis AT-TN408-A Specifiche tecniche

Sfoglia online o scarica il pdf Specifiche tecniche per Hardware di rete Allied Telesis AT-TN408-A. Allied Telesis AT-TN408-A 2. Central fabric controller module – 12gbps

Allied Telesis AT-TN408-A Specifiche tecniche
Datasheet |
integrated Multiservice Access Platform
CFC12
AT-TN408-A Central Fabric Controller module – 12Gbps
Carrier Grade Controller
The CFC12 controller module, available for
use with the iMAP 9100 chassis, is a new
advancement in controller card capability and
size. As network bandwidth continues to grow,
Service Providers find increasing bandwidth
demands farther in the local loop. The ability
to maintain a single IP infrastructure to address
Network Transport bandwidth as well as last
mile access bandwidth is pivotal for any
network operator.
The CFC12 enables the MiniMAP 9100, the
third and most recent chassis in Allied Telesis'
impressive line of carrier access products.
When operating in the 9100 chassis, the CFC12
provides unmatched flexibility for triple play
over any media (Fiber, Copper and xDSL) in
a 1U format. It continues the carrier class
capabilities from its larger brethren (CFC6
and CFC24) and adds the enhanced QoS
capabilities found in Allied Telesis' 10G platform
(CFC56).
With six on-board GE ports, the CFC12 is
ideally suited for delivering GbE services to any
Enterprise or business location relying on last
mile fiber access. With advances features
including per VLAN rate limiting, the GE ports
on the CFC12 module can be used as either
a network interface for subtended remote
locations or for point-to-point connectivity to a
strategic business. This is in addition to allowing
the service provider to have up to 3 different
service modules for delivering parallel business
services, or xTTH services.
Allied Telesis
Part of Allied Telesis' IP Broadband
Access Family
Whether it is Metro Ethernet, broadband
ADSL2+, FTTH or POTS, the iMAP family is
the ideal platform for last mile service delivery.
Added to the ability to support 100% of the
available iMAP service modules, the CFC12 has
also been designed to survive the most rugged
environmental conditions. This makes it perfect
choice for networks which require high
flexibility and carrier capabilities in a small form
factor.
Provisioning, management and diagnostics of
subscriber ports can be accomplished from
either the iMAP command line interface or
via the Allied View NMS. The CFC12 also has
a fully supported SNMP interface and supports
all the major MIBs.
Allied Telesis' iMAP family of integrated
Multiservice Access Platforms
Key Features
SNMP Management
Fully functional CLI
Inband Management
Out-of-band Management
Contact Alarm Managment
6 GbE Wirespeed ports
SFP Optics
Support for EPSR™ 50ms Resiliency
Per VLAN Rate Limiting
Hardened for OSP designs
QoS
Eight Queues
Strict Priority scheduling
VLAN Stacking
Security
Upstream Forwarding Only
Extensive ACL Suport
Services Supported
High Speed Internet
VoIP
IPTV
Business VPN
Network Element Subtending
www.alliedtelesis.com