Dell XPS M1210 Manuale di servizio - Pagina 22

Sfoglia online o scarica il pdf Manuale di servizio per Computer portatile Dell XPS M1210. Dell XPS M1210 45.

Stampa la pagina
Dell XPS M1210 Manuale di servizio
a.  Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.
b.  Lift the tape, if present, as necessary to pull the top flex-cable connector away from the display connector.
c.  If an optional camera is present on the computer, lift the tape that holds the camera cable in place on the back of the display panel.
1 back of display-panel cable
assembly
2 top flex-cable connector
 

Replacing the Display Panel

 
1. Reconnect the cable assembly to the back of the display panel.
 
2. Replace the display-panel brackets on the display panel
 
3. Place the display panel inside the display back cover.
 
4. Reconnect the speaker connector.
 
5. Reconnect the camera connector (if an optional camera is present).
 
6. Replace the M2 x 3-mm ground screw that attaches the display-panel ground wire to the display back cover.
 
7. Replace the four M2 x 3-mm screws (two on each side) that connect the display panel to the display back cover.
 
8. Replace the display bezel (see
 Display-Panel Brackets
 
Removing the Display-Panel Brackets
 
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface (such as the back
panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
 
1. Follow the instructions in
Before Working Inside Your
 
2. Remove the display assembly (see
 
3. Remove the display bezel (see
 
4. Remove the display panel (see
 
3 tape holding camera cable
5 pull-tab on inverter
in place
4 bottom flex-cable connector  
(seeReplacing the Display-Panel
Replacing the Display
Bezel).
Computer.
Removing the Display
Assembly).
Removing the Display
Bezel).
Removing the Display
Panel).
connector
 
Brackets).
Before Working Inside Your
Computer) before working inside the