Cradlepoint AER2200 Series Manuale di avvio rapido - Pagina 5
Sfoglia online o scarica il pdf Manuale di avvio rapido per Router wireless Cradlepoint AER2200 Series. Cradlepoint AER2200 Series 9. Branch router
Anche per Cradlepoint AER2200 Series: Manuale di avvio rapido (5 pagine), Come iniziare (2 pagine)
Stampa la pagina
11/2/2020
MC400-600M (Optional)
STEP 7: Attach the Wi-Fi antennas.
Attach the Wi-Fi antennas to the ports marked 2.4/5GHz and 5GHz.
Hold the antenna straight and twist the base to thread onto the device.
Tighten with fingers only (maximum torque not to exceed 4 in-lbs). Do not over-tighten.
STEP 8: Mount the router.
The AER2200 may be mounted in a number of ways, including on a desk, affixed to a wall or ceiling, or to a rack. Refer to the following for mounting best
practices.
DESK
Install the rubber feet (included) on the bottom of the router.
Place the router on a flat surface away from objects that cause RF interference, including concrete, reflective and metal surfaces, microwaves, and so on.
RACK
The AER2200 may be mounted within a rack using the AER2200 Rack Mount Kit (Part #170749-001)
(https://cradlepoint.com/product/accessories/aer2200-rack-mount-kit/).
Screw the rack mounts onto the sides of the AER2200.
Slide the AER2200 into the rack and secure using the rack mount screws, provided with the Rack Mount Kit.
STEP 9: Connect the Ethernet cable.
Connect the Ethernet cable to the port marked WAN on the back of the AER2200. Connect the other end to your WAN source.
STEP 10: Power up the router.
Connect the power supply to the router and then plug
the other end into an electrical outlet.
https://customer.cradlepoint.com/s/article/AER2200-Getting-Started
AER2200 Branch Router Quick Start Guide
MC400-1200M-B (Optional)
Switch the device to the ON
position (O = Off, – = ON).
5/9