Cradlepoint AER3100 Series Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Modem Cradlepoint AER3100 Series. Cradlepoint AER3100 Series 7. Aer3100 series. all-in-one, cloud-managed networking solution
Anche per Cradlepoint AER3100 Series: Manuale di avvio rapido (7 pagine)

Stampa la pagina
Cradlepoint AER3100 Series Manuale di avvio rapido
Quick Start Guide
/
AER3100 Series
LED Indicators
Power: The Cradlepoint AER3100/
+ 2.4GHz (green) = 2.4 GHz WiFi is
AER3150 must be powered using an
on and operating normally.
approved 54V DC power source.
+ 5GHz (blue) = 5 GHz WiFi is on
+ Green = Powered ON
and operating normally.
+ No Light = Not receiving power.
Signal Strength: Blue LED bars
Check the power switch and the
indicate the active modem's signal
power source connection.
strength.
+ Amber = Attention. Open the
+ 4 Solid Bars = Strongest signal
administration pages (see
page 4) and check the router
+ 1 Blinking Bar = Weakest signal.
status. The LED will show amber
(A blinking bar indicates half
until the user changes the
of a bar.)
default Administrator and WiFi
passwords. Default passwords
Internal Modem: Indicates the
must be changed to secure the
status of internal modems.
router.
External USB Modem: Indicates the
Ethernet WAN: Indicates
status of external USB modems.
information about a data source
Both internal and external USB
connected to the Ethernet WAN
modems have the following LED
port.
indicators:
+ Blue = Connected to an active
+ Green = Modem has established
Ethernet WAN interface
an active connection.
+ Blinking Green = Modem is
VPN: Indicates information about a
connecting.
VPN data source.
+ Amber = Modem is not active.
+ Green = Active VPN tunnel
+ Blinking Amber = Data
WiFi Broadcast: (only on AER3100)
connection error. No modem
These two LEDs indicate activity on
connection possible.
the WiFi broadcast for both the 2.4
+ Blinking Red = Modem is in the
GHz and 5 GHz bands.
process of resetting.
Additional LED Indications
+ Several different LEDs blink
+ Two of the modem LEDs blink
when the factory reset button
red in unison for 10 seconds
is detected.
when there is an error during a
NetCloud OS (firmware) upgrade.
©Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
AER3100 MODEM DETAILS
Accessories:
+
Additional MC400 4G LTE modem*
+
Replacement power adapters and
international power cords
+
External modem antennas and cabling
*A Cradlepoint MC400 4G LTE modem comes standard with the AER3100/AER3150. Add a second integrated MC400
modem for a complete "Cut-the-Wire" 4G LTE solution, fusing enterprise reliability with unparalleled agility.
Enterprise Support
For enhanced services including enterprise-level support, extended warranties, site surveys,
and expert installation, learn more about Cradlepoint's CradleCare suite of services at
cradlepoint.com/cradlecare.

GETTING STARTED

Setting up the router

+
Purchase a data plan. Insert the SIM
as shown in the following step.
+
Connect modem antennas (finger
tight only).
|
cradlepoint.com

Model Numbers:

AER3100
S4A525A
AER3150
S4A530A
+
Plug the power supply into an
electrical outlet.
+
Ensure power is switched on.
O = OFF I = ON
3