Dell Wyse Z90DW Manuale di installazione - Pagina 12

Sfoglia online o scarica il pdf Manuale di installazione per Desktop Dell Wyse Z90DW. Dell Wyse Z90DW 18. Z class cloud clients
Anche per Dell Wyse Z90DW: Manuale di installazione (24 pagine), Manuale di avvio rapido (6 pagine), Manuale di avvio rapido (8 pagine), Manuale di avvio rapido (8 pagine), Manuale di avvio rapido (8 pagine), Manuale di avvio rapido (6 pagine), Manuale di avvio rapido (6 pagine), Manuale di avvio rapido (8 pagine), Manuale di avvio rapido (6 pagine), Manuale di avvio rapido (6 pagine)

Chapter 3

Procedures

IMPORTANT: Complete the following procedures as an administrator (administrator

privileges are required).

Step 1: Copy the Z Class WES7p Conversion Image Folder (on the DVD-ROM) to Your Local

Hard Drive

Navigate to the Z Class WES7p Conversion Image folder (contained on the Conversion

Software Assembly DVD-ROM) and copy it to your local hard drive.

Step 2: Install Wyse USB Firmware Tool v1.20,0,1

1. Navigate to the Wyse USB Firmware Tool v1.20.0.1_GA.exe (contained on the

2. Right-click the Wyse_USB_Firmware_Tool_v1.20.0.1.exe and click Run as

3. Enter the destination folder you want (for example, C:\USB_v_1.20.0.1) in the Unzip

4. After installation, create a shortcut on the desktop for the Wyse USB Firmware

Step 3: Use Wyse USB Firmware Tool to Configure a Single USB Key that will Push

Firmware

CAUTION: Complete the configuration procedures as an administrator. For Windows 7

Enterprise and Windows 7 Ultimate, right-click on Wyse USB Firmware Tool.exe and

select the Run as administrator option.

1. Right-click the shortcut on the desktop for the Wyse USB Firmware Tool.exe file and

Figure 7 Wyse USB Firmware Tool wizard

2. Click Next to open the Select an Option dialog box.

Conversion Software Assembly DVD-ROM).

administrator to execute the file and open the WinZip Self-Extractor dialog box.

to folder box, and then click Unzip to extract all files from the Wyse USB Firmware

Tool v1.20.0.1_GA.exe file into the folder. The default directory for the extracted files

is C:\USB_v_1.20.0.1.

CAUTION: It is not recommended to use your desktop for the destination folder as

there are several files that will be extracted from the .exe file.

Tool.exe file (see your operating system documentation).

select Run as administrator to run the tool and open the Wyse USB Firmware Tool

wizard (the welcome page provides the product version and description, and a link

to view the Wyse end user license agreement).