Dell XPS 430 Manuale di servizio - Pagina 20

Sfoglia online o scarica il pdf Manuale di servizio per Desktop Dell XPS 430. Dell XPS 430 42. Dell xps computer setup
Anche per Dell XPS 430: Impostazione (2 pagine)

Stampa la pagina

fan cage

processor fan

8. To replace the processor fan, orient the fan power cable downward. Align the rubber grommets in the fan with the holes in each corner of the processor

airflow shroud, then pull the grommets through until they snap into place.

NOTE:

Airflow direction and orientation are shown on the side of the fan.

9. Replace the processor fan cage into the cage housing (see

10. Connect the fan cable to the FAN_CPU connector on the system board (see

11. Replace the processor airflow shroud (see

12. Replace the computer cover (see

13. Connect your computer and devices to electrical outlets, and then turn them on.

Replacing the Card Fan

1. Follow the procedures in

Before You

2. Remove the computer cover (see

3. Remove any full-length expansion cards (see

4. Disconnect the fan cable from the FAN_CARD_CAGE connector on the system board (see

5. Lift and hold the tab present at the bottom of the fan cage. Pressing the top of the cage, slide it towards the back of the computer. Gently ease the

cage out of the groove.

fan cage

6. One by one, carefully pull on each corner of the fan to detach the four rubber grommets securing the fan to the fan cage.

card fan

rubber grommet (4)

release tabs (2)

Replacing the Processor Fan

Replacing the Processor Airflow Shroud

Replacing the Computer

Cover).

Begin.

Removing the Computer

Cover).

Replacing PCI and PCI Express

tab

card fan cage

Cage).

System Board

Components).

Assembly).

Cards).

System Board

Components).