Chris Coffee Service Vetrano Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Caffettiera Chris Coffee Service Vetrano. Chris Coffee Service Vetrano 17. Espresso machine

Group Gasket And Shower Screen Replacement

The group gasket is a black rubber gasket that makes the seal between the portafilter and the
group head. We recommend replacing the gasket on a yearly basis. The Vetrano uses an E61
8.5mm gasket. They can be purchased from our website at the link below.
http://www.chriscoffee.com/products/home/e61groupparts/e61groupgasket
Replacing the group gasket requires the removal of the shower screen as well so we also
recommend replacing the shower screen at the same time. The E61 shower screen can be
purchased from our website at the link below.
http://www.chriscoffee.com/products/home/e61groupparts/faemae61groupscreen
Before replacing the group gasket and shower screen the machine should be turned off and
cooled down so that the grouphead is cool to the touch.
Gasket and Screen Removal
There are two ways to remove the group gasket and shower screen depending on how old
they are. If you replace the gasket yearly then the first method shown is recommended. If the
gasket is older and dried out then the second method shown will be necessary.
Method 1
In the picture to the right shows an indent that
goes around the perimeter of the screen.
Insert either a flat blade screwdriver or a spoon
into the indent and then carefully pry the gasket
and screen down. You may have to do this on a
few spots to remove them.
Method 2
If the gasket and screen will not come out using
the method above then you will need a scratch awl
or ice pick to remove them.
Using the awl or pick, deeply pierce the gasket
and then pry it down. If the gasket is old and dried
out then it will break apart and come out in pieces.
Repeat until all remnants of the old gasket are
removed.
Vetrano
Chris' Coffee Service Inc.
- 13 -