Dell 3250 Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Server Dell 3250. Dell 3250 39. Product guide (.pdf)
Anche per Dell 3250: Aggiornamento delle informazioni (32 pagine), Manuale del prodotto (37 pagine), Manuale d'uso (39 pagine), Manuale di avvio rapido (2 pagine)
3.
Disconnect all network cables from the computer.
4.
Disconnect your computer and all attached devices from their electrical outlets.
5.
Press and hold the power button while the computer is unplugged to ground the system board.
6.
Remove the cover.
CAUTION: Before touching anything inside your computer, ground yourself by touching an
unpainted metal surface, such as the metal at the back of the computer. While you work,
periodically touch an unpainted metal surface to dissipate static electricity, which could
harm internal components.
Turning Off Your Computer
CAUTION: To avoid losing data, save and close all open files and exit all open programs before
you turn off your computer.
1.
Turning off your computer (Windows 8.1):
•
Using a touch enabled device:
a. Swipe in from the right edge of the screen, opening the Charms menu and select Settings.
b. Select
and then select Shut down.
or
a. On the Home screen, touch
•
Using a mouse:
a. Point to upper-right corner of the screen and click Settings.
b. Click
and then select Shut down.
or
a. On the Home screen, click
2.
Turning off your computer (Windows 7):
a. Click Start
.
b. Click Shut Down.
or
a. Click Start
.
b. Click the arrow in the lower-right corner of the Start menu, and then click Log off.
3.
Ensure that the computer and all attached devices are turned off. If your computer and attached
devices did not automatically turn off when you shut down your operating system, press and hold
the power button for about 6 seconds to turn them off.
After working inside your computer
After you complete any replacement procedure, ensure that you connect any external devices, cards, and
cables before turning on your computer.
1.
Replace the cover.
6
and then select Shut down.
and then select Shut down.