Dell DX6000G Manuale di installazione e configurazione - Pagina 14
Sfoglia online o scarica il pdf Manuale di installazione e configurazione per Server Dell DX6000G. Dell DX6000G 23. Rack installation instructions — static rails
Anche per Dell DX6000G: Manuale d'uso (48 pagine), Note di rilascio (7 pagine), Installazione del rack (2 pagine), Installazione del rack (2 pagine)
Stampa la pagina
descriptive error is not passed through to the client. Check the syslog for a full description
of the possible errors if the uninstall is unsuccessful.
2.6. Restoring CFS
Should a CFS server ever fail or need to be repurposed, all persisted data can be restored or moved
onto a new CFS server by configuring the server as you would a new server but then replacing the
CNS rootUUID with the previously configured one. Recovering with the rootUUID will not restore
files that had not yet been spooled into DX Storage or that were written to the namespace in the 60
seconds prior to a server failure. For planned moves, administrators should ensure that writes are
quiesced for a period of time prior to the restore.
To re-install or move CFS onto a new server, execute the following steps:
1.
If migrating from version 2.0, install Red Hat 6.0 on a new server.
2.
Install and configure CNS as it was configured previously using the installation instructions
above. The DX Storage cluster MUST be the same as the previous configuration in order to
retrieve the previously stored data.
3.
Stop all client activity on the old server. Stopping remote Samba or NFS access to the share is
an easy way to do this.
4.
Monitor the local spooler cache draining to zero by using the following script:
./cfs-checkspool
The script will monitor the spool cache and any active writes for all configured shares in a loop
and print a statement when all activity has completed and it is safe to shutdown CFS.
5.
Stop CFS on the old server: /etc/init.d/caringo-cfs stop
6.
Stop CNS on the old server: /etc/init.d/caringo-cns stop
7.
Edit the CNS configuration file on the new server (nano /opt/caringo/fabric/etc/
cns.conf) and replace the existing root_anchor parameter with the previous server's
rootUUID.
8.
Recreate the CFS shares using the cfs-admin mkfs script. The DX Storage cluster and the
mount IDs for the shares MUST be same as the ones prior to the upgrade.
9.
Start CNS and CFS as normal.
If you are restoring a system after a failure, the process is the same except steps 2-5 above will not
be necessary.
Copyright © 2011 Caringo, Inc.
All rights reserved
11
Version 2.6
February 2011