Dell E74S001 Manuale di riferimento - Pagina 10

Sfoglia online o scarica il pdf Manuale di riferimento per Server Dell E74S001. Dell E74S001 25.

Stampa la pagina

Table 5. Processor Settings details (continued)

Option

Processor n

Table 6. Processor details

Option

Family-Model-Stepping

Brand

Level 2 Cache

Level 3 Cache

Number of Cores

Maximum Memory Capacity

Microcode

SATA Settings

To view the SATA Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >

SATA Settings..

Table 7. SATA Settings details

Option

Embedded SATA

Security Freeze Lock

Write Cache

Port n

Pre-operating system management applications

Description

UCR SRAR Machine Check Exception is delivered only to the

affected thread rather than broadcast to all threads in the

system. The feature supports operating system recovery for

cases of multiple recoverable faults that are detected close,

which would otherwise result in a fatal machine check event.

The feature is available only on Advanced RAS processors.

This option is set to Disabled by default.

The following settings are displayed for each processor:

Description

Specifies the family, model, and stepping of the processor as

defined by Intel.

Specifies the brand name.

Specifies the total L2 cache.

Specifies the total L3 cache.

Specifies the number of cores per processor.

Specifies the maximum memory capacity per processor.

Specifies the processor microcode version.

Description

Enables the embedded SATA option to be set to Off, AHCI mode , or RAID modes.

This option is set to AHCI Mode by default.

NOTE:

1. You might also need to change the Boot Mode setting to UEFI. Otherwise, you

should set the field to Non-RAID mode.

2. No ESXi and Ubuntu OS support under RAID mode.

Sends Security Freeze Lock command to the embedded SATA drives during POST.

This option is applicable only for AHCI Mode. This option is set to Enabled by default.

Enables or disables the command for the embedded SATA drives during POST. This

option is set to Disabled by default.

Sets the drive type of the selected device.

For AHCI Mode or RAID modes, BIOS support is always enabled.

Table 8. Port n

Options

Model

NOTE:

Depending on the number of processors, there

might be up to n processors listed.

Descriptions

Specifies the drive model of the selected

device.