Dell EMC VxRail S Series Manuale d'uso - Pagina 28

Sfoglia online o scarica il pdf Manuale d'uso per Server Dell EMC VxRail S Series. Dell EMC VxRail S Series 32.

Stampa la pagina
Dell EMC VxRail S Series Manuale d'uso
You can add or replace hardware components, on your VxRail
power supplies. Only Dell EMC certified service technicians should perform these procedures. For certain hardware components, you may
need to contact Customer Support for repair or replacement.
Using SolVe Desktop application for VxRail Series
hardware tasks
Step-by-step hardware component tasks such as replacement and upgrade procedures are available through the SolVe Desktop
application.
Prerequisites
You must have an online support account to use the SolVe Desktop application.
About this task
CAUTION:
To avoid data loss, ensure that you refer to the VxRail Series procedures in the SolVe Desktop application before
replacing hardware or performing any upgrade procedures.
Steps
1
Log in to the EMC Online Support site.
2
Click SolVe on the main page.
3
Click the download link for the SolVe Desktop application.
4
Save the executable file and then run it to install the SolVe Desktop.

Memory

The appliance supports DDR4 registered DIMMs (RDIMMs) and load reduced DIMMs (LRDIMMs). Memory holds the instructions that are
executed by the processor.
CAUTION:
To avoid data loss, ensure that you refer to the procedures in the SolVe Desktop application before performing any
memory or expansion card replacement or upgrade procedures.
NOTE:
MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 1866 MT/s, 2133 MT/s, or 2400 MT/s depending on the following factors:
•
DIMM type (RDIMM or LRDIMM)
•
Number of DIMMs populated per channel
•
System profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)
•
Maximum supported DIMM frequency of the processors
Your appliance contains 24 memory sockets split into two sets of 12 sockets, one set per processor. Each 12-socket set is organized into
four channels. In each channel, the release tabs of the first socket are marked white, the second socket black, and the third socket green.
28

Replacing and adding hardware

Replacing and adding hardware
™
appliance, such as hard disk drives (HDDs), solid state drives (SSDs), and
6