Dell Force10 S2410 Manuale di avvio rapido - Pagina 17

Sfoglia online o scarica il pdf Manuale di avvio rapido per Server Dell Force10 S2410. Dell Force10 S2410 31. Installing the s2410 system
Anche per Dell Force10 S2410: Manuale (42 pagine)

Stampa la pagina

Installing the Software

Navigating CLI Modes

The SFTOS prompt changes to indicate the CLI mode. You must move linearly

through the command modes, with the exception of the end command which

takes you directly to Privileged EXEC mode; the exit command moves you up

one command mode level.

Console Access

You must first connect the console port to a management terminal in order to use

the Command Line Interface (CLI) to set up alternative management interfaces,

such as an SFTOS Web User Interface connection to the Ethernet Management

port.

NOTE: Before starting this procedure, be sure you have a terminal emulation

program already installed on your PC.

Step

Task

CAUTION:

Series) to connect to the console port. This is in contrast to the straight-

through cable used on other S-Series models. In more detail, the cable

connections are pin 1 to pin 8, pin 2 to pin 7, pin 3 to pin 6, pin 4 to pin 5,

and the inverse for pins 5 through 8.

If necessary, connect the RJ-45/DB-9 adapter that is shipped with the S2410

system to the end of the RJ-45 cable that will connect to your terminal.

You must use a rollover cable (same as used for the E-

Installing the Software