Dell P570 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Server Dell P570. Dell P570 35.
Anche per Dell P570: Manuale d'uso (37 pagine), Manuale d'uso (35 pagine)

Stampa la pagina
Dell P570 Manuale d'uso
Icon
Description
Hard drive
indicator
Temperature
indicator
Electrical
indicator
Memory
indicator
PCIe indicator
VxRail health and VxRail ID indicator codes
The VxRail health and VxRail ID indicator is located on the left control panel of your VxRail.
The following table describes the health and ID indicator codes:
VxRail health and VxRail ID
indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber

Right control panel view

The following figure and table describes the features available on the right control panel:
12
VxRail overview
Condition
The indicator turns solid amber if
there is a hard drive error.
The indicator turns solid amber if
the VxRail experiences a thermal
error (for example, the ambient
temperature is out of range or there
is a fan failure).
The indicator turns solid amber if the
VxRail experiences an electrical error
(for example, voltage out of range, or
a failed power supply unit (PSU) or
voltage regulator).
The indicator turns solid amber if a
memory error occurs.
The indicator turns solid amber if a
PCIe card experiences an error.
Condition
Indicates that the VxRail is switched on, it is healthy, and VxRail ID mode is not
active. Press the VxRail health and VxRail ID button to switch to VxRail ID mode.
Indicates that the VxRail ID mode is active. Press the VxRail health and VxRail ID
button to switch to VxRail health mode.
Indicates that the VxRail is in fail-safe mode. If the problem persists, see Support.
Indicates that the VxRail is experiencing a fault. If the problem persists, see Support.
Corrective action
Check the System Event Log to determine if the drive
has an error. If the problem persists, see Support.
Ensure that none of the following conditions exist:
● A cooling fan has been removed or has failed.
● VxRail cover, air shroud, memory module blank, or
back filler bracket is removed.
● Ambient temperature is too high.
● External airflow is obstructed.
If the problem persists, see Support.
Check the System Event Log or VxRail messages for
the specific issue. If it is due to a problem with the
PSU, check the LED on the PSU. Reseat the PSU. If
the problem persists, see Support.
See the
Support
section.
See the
Support
section.
NOTE:
For more information about the supported
PCIe cards, see
Expansion card installation
guidelines.