Allied Telesis AT-9900 Series Come fare - Pagina 5

Sfoglia online o scarica il pdf Come fare per Software Allied Telesis AT-9900 Series. Allied Telesis AT-9900 Series 8. How to set up pppoe between a linux client and access concentrator
Anche per Allied Telesis AT-9900 Series: Manuale delle funzioni (18 pagine), Come configurare (9 pagine)

Stampa la pagina
Allied Telesis AT-9900 Series Come fare
Debugging and Verifying
Apart from PING, you can also check the following on your linux PC:
[root@linux_client michael]# ifconfig
ppp0 Link encap:Point-to-Point Protocol
[root@linux_client michael]# ps ax | grep ppp
4747 ?
4748 ?
4769 pts/0
[root@linux_client michael]# pppstats
IN
310
On your Allied Telesis device, you can check the following:
ena ppp templ=1 debug=decode
ena ppp templ=1 debug=all
show ppp
show ppp pppoe
Set Up PPPoE Between a Linux Client and an Allied Telesis Access Concentrator
inet addr:192.168.0.1
UP POINTOPOINT RUNNING NOARP MULTICAST
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
S
S
R
PACK VJCOMP
VJUNC
7
0
P-t-P:192.168.0.254
0:00 /usr/sbin/pppd pty pppoe -I eth1
0:00 pppoe -I eth1
0:00 grep ppp
VJERR
|
0
0
|
Mask:255.255.255.255
MTU:1492
Metric:1
OUT
PACK VJCOMP
322
8
0
VJUNC NON-VJ
0
8
5