Dell PowerEdge PDU Managed LED Manuale - Pagina 11

Sfoglia online o scarica il pdf Manuale per Server Dell PowerEdge PDU Managed LED. Dell PowerEdge PDU Managed LED 11. Site planning guide
Anche per Dell PowerEdge PDU Managed LED: Manuale (20 pagine), Manuale (20 pagine), Manuale (17 pagine), Manuale (12 pagine), Manuale (10 pagine), Manuale (10 pagine), Manuale (9 pagine), Manuale (9 pagine), Manuale (10 pagine), Manuale (12 pagine), Manuale (12 pagine), Manuale (11 pagine), Manuale (8 pagine), Manuale (11 pagine), Manuale (11 pagine), Manuale (9 pagine), Manuale di pianificazione del sito (8 pagine)

Cable Routing Procedures for Dell PowerEdge R320 & R420 Systems

Section 4: Cabling a PowerEdge R320 or R420 system installed

on static rails

NOTE: The CMA is compatible only with the sliding rails, not the static rails.

1. Follow the instructions contained in the Rack Installation Instructions found in the static rail kit to

install the server into a two-post or four-post rack.

2. Install the hook-and-loop straps provided in the rail kit through the slots in the rear brackets of the

rails as described in the Rack Installation Instructions.

3. Connect all applicable cables to the rear of the system and verify that all connections are secure.

4. Using the hook-and-loop straps, bundle the cables and secure them to either the left rail or right

rail as described in the Rack Installation Instructions. See Figure 12 for an example of data cables

secured to the left rail and power cables secured to the right rail (as viewed from the rear of the

system).

Figure 12.

Cabling a system installed in static rails