Avue AU-G50IR-WB26 Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per Telecamera di sicurezza Avue AU-G50IR-WB26. Avue AU-G50IR-WB26 17. High-speed outdoor ptz camera series

Stampa la pagina
INSTALLATION

RS485 Termination

For a smooth telemetric operation, it is necessary to set the termination properly.
1. Chain Connection
ID:1
ID:2
Termination
Termination
ON
OFF

Mounting

Surface-Mount
360°
Pan
Use 4 Screws to fix
(not included)
Mobile-Mount with Anti-Shock

Application Example

Multiple PTZ
Video output
DVR
Monitor
Keyboard
Controller

RS485 Transmission

The distance of RS485 transmission between 2 nodes depends on the baud-
rate. The table on the right side shows the maximum range of every baud-
rate, assuming a AWG24 wire-pair is used. Note the range might be shorter
than given here, since the cable quality or interferences may affect the
transmitted data, and cause invalid command.
In star-form connection, it might be necessary to use RS-485 Distributor, to
ensure the signal quality of the transmission.

Video Transmission

For video signal transmission, coaxial cable with 75 Ohm impedence is recommended. Depends on the cable type, the transmission
distance might be different:
Cable standard
Max. Distance (m /ft )
RG 59 /U
229m / 750 ft
RG 6 /U
305m/ 1000 ft
RG 11 /U
457m / 1500 ft
RS 485+
RS 485-
Keyboard
Termination
ON
ID:3
ID:4
Termination
Termination
OFF
OFF
Wall-Mount
180°
Tilt
Power
Power
RS-485 Daisy-Chain or Star-Form
connection, Termination on the ends.
The actually transmission distance can vary from the data shown on the table left. It is
necessary to consider the environmental in fluences when planning the installation. If
the transmission requires a larger distance, you may use video-balun or fiber-transmitter
to extend the distance. Contact your local sales representative for further information.
2. Star-Form Connection
ID:1
Termination
ON
Use 4 Screws
to fix (not
included)
Wall-Mount Bracket
(optional accessory)
Make sure the installation
enviroment provide enough
space for pan and tilt
movement, else it might
damage the mechanic parts.
Simple PTZ
Power
ID:2
Termination
ON
Keyboard
Termination
ON
Reverse-Mount
Use 4 Screws to fix
(not included). Change SETTING in OSD
Video output
RS-485
Line
Keyboard
Power
DVR
Controller
Max. Distance
Baud Rate
1700m
2400 bps
4800 bps
1100m
9600 bps
700m
19200 bps
400m
English
ID:3
Termination
ON
ID:4
Termination
ON
Monitor
2