Dell PowerVault MD3220i Series Manuale d'uso - Pagina 17

Sfoglia online o scarica il pdf Manuale d'uso per Server Dell PowerVault MD3220i Series. Dell PowerVault MD3220i Series 41. Storage arrays
Anche per Dell PowerVault MD3220i Series: Manuale di aggiornamento (32 pagine), Istruzioni per l'installazione del rack (2 pagine), Manuale di installazione (18 pagine), Aggiornamento delle informazioni (1 pagine), Manuale tecnico (38 pagine), Manuale (16 pagine)

Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software

To verify the configuration enter the following command:

esxcfg-vswitch –l

The output will look similar to this:

Switch Name

vSwitch2

PortGroup Name VLAN ID Used Ports

iSCSI3

iSCSI2

iSCSI1

This will show the VMkernel ports that are assigned to the vSwitch. To verify the IP addresses enter the

following command:

esxcfg-vmknic –l

The output will look similar to the graphic below.

You can also verify the IP Addresses via the vCenter GUI. In vCenter, on the ESX Host, navigate to

Configuration -> Networking.

Step3: Assign Network Adapters

The next step in the process is to assign the network adapters (NICs) that will be attached to the iSCSI

network and used for iSCSI traffic. These will be attached to the vSwitch2 that we created earlier. This can

be done two ways, in the vCenter GUI or by CLI.

To list all of the adapters in the system run the following command:

Num Ports

Used Ports

Configured Ports MTU Uplinks

Uplinks

9000

Page 15