Dell VEP4600 Manuale di installazione - Pagina 14

Sfoglia online o scarica il pdf Manuale di installazione per Server Dell VEP4600. Dell VEP4600 40.
Anche per Dell VEP4600: Manuale di configurazione (23 pagine), Manuale di installazione (40 pagine)

Stampa la pagina

VEP4600 is universal customer premise equipment (uCPE). To connect the service provider edge or enterprise branch to the cloud, use

VEP4600 to host multiple virtual network functions (VNFs), such as SD-WAN, routing, firewall, and deep-packet inspection.

For more information about platform specifications, see

NOTE:

Install the VEP4600 in a rack or cabinet before installing the components.

Topics:

•

Site selection

•

Cabinet placement

•

Rack mounting

•

Platform ground

•

Fans and airflow

•

Power

•

Storing components

Site selection

CAUTION:

The mezzanine cards are intended for professional installation only.

CAUTION:

Professional installation instructions: This product is designed for specific applications and needs to be

installed by qualified personnel with RF and regulatory related knowledge. The general user shall not attempt to install

or change the setting.

Install your equipment in restricted access areas. A restricted access area is one where service personnel can only gain access using a

special tool, lock, key, or other means of security. The authority responsible for the location controls access to the restricted area.

Ensure that the area where you install your platform meets the following safety requirements:

•

Near an adequate power source. Connect the platform to the appropriate branch circuit protection according to your local electrical

codes.

•

Environmental—platform location—continuous temperature range is from 0°C to 45°C (32°F to 113°F).

•

Operating humidity is from 5 to 90 percent non-condensing, continuous.

•

In a dry, clean, well-ventilated, and temperature-controlled room, away from heat sources such as hot cooling vents or direct sunlight.

•

Away from sources of severe electromagnetic noise.

•

Positioned in a rack or cabinet, or on a desktop with adequate space in the front, back, and sides for proper ventilation and access.

•

Install the platform in Information Technology Rooms in accordance with Article 645 of the National Electrical Code and NFPA 75.

For more information about platform storage and environmental temperatures, see

Cabinet placement

Install the VEP4600 only in indoor cabinets designed for use in a controlled environment.

Do not install the platform in outside cabinets. For cabinet placement requirements, see Site selection section .

The cabinet must meet minimum size requirements. Airflow must be in accordance with the Electronic Industries Alliance (EIA) standard.

Ensure that there is a minimum of 5 inches (12.7 cm) between the intake and exhaust vents and the cabinet wall.

Site preparations

Specifications

Site preparations