Dell VxRail S670 Manuale di installazione e assistenza - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione e assistenza per Server Dell VxRail S670. Dell VxRail S670 35.
Anche per Dell VxRail S670: Manuale di installazione e assistenza (40 pagine)

Stampa la pagina

Rear view of the system

Rear view of the VxRail P670F and S670 with 4 x 2.5-inch rear drive
module
Item
Ports, panels, or slots
1
Rear drive module
2
PCIe expansion card riser
2 (slot 3 and slot 6)
3
Rear handle
4
BOSS S2 module
5
USB 2.0 port (1)
6
PCIe expansion card riser
4 (slot 7 and slot 8)
7
Power supply unit (PSU
2)
8
VGA port
9
USB 3.0 port (1)
10
iDRAC dedicated port
11
System identification
button
Icon
Description
N/A
Enables you to install drives supported on your system. For more
information about drives, see the Dell VxRail™ P670F, P670N,
V670F, and S670 Technical Specifications.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the Dell VxRail™ P670F, P670N,
V670F, and S670 Technical Specifications.
N/A
To lift the system.
N/A
This slot supports the BOSS S2 module.
This port is USB 2.0-compliant.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the Dell VxRail™ P670F, P670N,
V670F, and S670 Technical Specifications.
For more information about the PSU configurations, see the Dell
VxRail™ P670F, P670N, V670F, and S670 Technical Specifications.
For more information about the VGA, see the Dell VxRail™ P670F,
P670N, V670F, and S670 Technical Specifications.
This port is USB 3.0-compliant.
Enables you to remotely access iDRAC. For more information, see the
iDRAC User's Guide at www.dell.com/poweredgemanuals.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16 s.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
● If the system stops responding during POST, press and hold
the system ID button (for more than 5 s) to enter the BIOS
progress mode.
System overview
9