Allied Telesis AT-S87 Nota di rilascio - Pagina 3

Sfoglia online o scarica il pdf Nota di rilascio per Software Allied Telesis AT-S87. Allied Telesis AT-S87 4. Version 1.0.0 at-gs950/48 gigabit ethernet smart switch

Stampa la pagina

A 1000 MB SFP module can be auto detected when you insert it into the AT-GS950/48

Gigabit Ethernet Smart Switch. However, you must configure the port mode to Auto for the

Gigabit SFP module to become operational per the procedure given above.

A 1000 MB SFP module can be manually configured for 1000 full duplex with no auto-

negotiation by setting the SFP port Mode to "1G-Full" per the procedure given above.

To activate a port configuration change, be sure to perform the following steps after selecting

and changing a configuration parameter for either a copper or SFP port on the Physical

Interface page:

1. Click the Modify button on the Physical Interface page.

2. Click the OK button on the Physical Interface page.

3. To activate these changes and permanently save these settings to the configuration file,

go to the Save Configuration page and click on the Save button. The port configuration

changes will only take affect after completing this step.

PN 613-000911 Rev B

AT-S87 Version 1.0.0 Software Release Notes

Allied Telesis, Inc.