Dell Wyse Z90DW Manuale di installazione - Pagina 17

Sfoglia online o scarica il pdf Manuale di installazione per Server Dell Wyse Z90DW. Dell Wyse Z90DW 24. Z class cloud clients
Anche per Dell Wyse Z90DW: Manuale di installazione (18 pagine), Manuale di avvio rapido (6 pagine), Manuale di avvio rapido (8 pagine), Manuale di avvio rapido (8 pagine), Manuale di avvio rapido (8 pagine), Manuale di avvio rapido (6 pagine), Manuale di avvio rapido (6 pagine), Manuale di avvio rapido (8 pagine), Manuale di avvio rapido (6 pagine), Manuale di avvio rapido (6 pagine)

Installing Firmware

This chapter includes the requirements and procedures you need to install and use

Wyse USB Firmware Tool to update your thin client to the firmware you need.

TIP: The purpose of the USB Firmware Tool is to configure a bootable USB key for

device firmware. In the following procedures, you will create a configured USB key

containing the firmware contents that you need, and then boot from this configured

USB key on appropriate product and flash size devices to push the contents of the USB

key onto these target devices (containing your upgraded flash).

EXTREEMLY IMPORTANT: You must perform the steps to create and use the

configured USB key on each thin client as noted. You cannot completely convert one

thin client and then use the USB Firmware Tool to pull and push that image to your

other thin clients.

Requirements

•

Machine with a minimum of 16 GB of free space running either of the following:

Windows Server 2008 R2 SP1

Windows 7 Enterprise (32-bit and 64-bit)

Windows 7 Ultimate (32-bit and 64-bit)

USB Key:

USB 2.0 only

USB key size should be 16 GB (see also "USB Keys - Troubleshooting Boot Issues")

CAUTION: During the USB key configuration process the USB keys will be

reformatted.